Frequently Asked Questions

Q- If I have 2 Fox-Paws units working in close range of each other, and a transmitter button is pushed for one unit, will the other unit shut down also?
A- No.

Example: Unit "1" has 2 transmitters on 2 different personnel. Unit "2" has 3 transmitters on 3 different personnel. Personnel working with Unit "1" transmits, only Unit "1" shuts down. Unit "2" keeps running until it is shut off manually or Unit "2"'s personnel transmits.

Q- What if I have a 24 volt system, will your unit work?
A- Yes, with our 24volt to 12volt converter.

Q- What if I was running my engine and I shut it off remotely, and forgot to turn off the key on the machine, will the receiver still draw voltage.
A- Yes, the unit is still drawing voltage.

Q- I want to purchase a unit, but I possibly want another transmitter later on, is this possible?
A- Yes, you can purchase additional transmitters later on, but you will have to program the transmitter to the receiver. Additional programming required.

Q- If I put a Model 400 in my grain tank system, can I hook it up so the sweep auger and the auger under the floor and the leg all stop at the same time?
A- Yes, you can wire all the individual start circuits of each motor to be controlled by the Model 400. In our seed plant we have over 20 motors all controlled by one Model 400, and when you press the transmitter button, all motors stop simultaneously.  

Page 1>> Page 2